Paradox Custom Trans White Aged 'checked' Nitro

Features our one piece neck through construction with a Indian Ebony fretboard. This guitar has a checked nitro finish on a Tulipwood body with Maple facings. Available to ship worldwide in a deluxe hard case or custom built, full flight case (optional extra).

SPECIFICATION
NECK: Through-neck - one piece, quarter sawn, Maple
BODY: Tulipwood and Maple
FINGERBOARD: 24 fret Indian Ebony
SCALE LENGTH: 25.5”
FINGERBOARD RAD: 13”-14” Custom Compound
NECK PROFILE: Custom Lucem “C / D”
FINISH: Trans White - Aged Relic
FRETWIRE: Nickel Silver - Medium Jumbo.
FRET MARKERS: White mother of Pearl dots and side dots.
NUT MATERIAL: Bone.
TRUSS ROD: 2-way slim line.
SCRATCHPLATE: Acrylic vintage brown tortoiseshell.
HARDWARE: Aged Nickel
BRIDGE/TREM: Schroeder Wraparound
TUNERS: Grover Rotomatics
CONTROLS: 5 x CTS 500k audio push pull pots (tolerance 10%) 2 x 0.022uF orange drop capacitors Switchcraft toggle switch and jack 1x volume and 1x tone for each pickup.

PICKUPS:
Bare Knuckle ‘The Mule’ aged set with nickel radiator covers

SWITCHING
Provides 21 possible different combinations:
All controls in down position - Normal config
Neck volume up - Neck humbucker coil split
Bridge volume up - Bridge humbucker coil split
Neck tone up - Neck and Bridge in series
Bridge tone up - Neck and bridge out of phase

Features our one piece neck through construction with a dark rosewood fretboard. This guitar is beautifully aged and finished in a traditional nitro finish on a reclaimed Brazilian Mahogany body. Available to ship worldwide in a deluxe hard case or custom built, full flight case (optional extra)

SPECIFICATION
NECK: Through-neck - one piece, quarter sawn, reclaimed Brazilian Mahogany
BODY: Reclaimed Brazilian Mahogany
FINGERBOARD: 24 fret Indian Rosewood
SCALE LENGTH: 25.5”
FINGERBOARD RAD: 13”-14” Custom Compound
NECK PROFILE: Custom Lucem “C / D”
FINISH: Drab Olive Green Nitro Cellulose - Aged Relic
FRETWIRE: Nickel Silver - Medium Jumbo.
FRET MARKERS: White mother of Pearl blocks and side dots.
NUT MATERIAL: Bone.
TRUSS ROD: 2-way slim line.
SCRATCHPLATE: Acrylic vintage brown tortoiseshell.
HARDWARE: Aged Nickel
BRIDGE/TREM: BIGSBY B5 with Stewmac Roller Saddle M/C
TUNERS: Grover Rotomatics
CONTROLS: 5 x CTS 500k audio push pull pots (tolerance 10%) 2 x 0.022uF orange drop capacitors Switchcraft toggle switch and jack 1x volume and 1x tone for each pickup, plus independent master volume control knob Provides 21 possible different combinations:

PICKUPS:
Sunbear
Neck: Alnico 3 ‘57 PAF with aged cover
Bridge: Alnico 4 ‘59 PAF with aged cover

SWITCHING
Provides 21 possible different combinations:
All controls in down position - Normal config
Neck volume up - Neck humbucker coil split
Bridge volume up - Bridge humbucker coil split
Neck tone up - Neck and Bridge in series
Bridge tone up - Neck and bridge out of phase

Features our one piece neck through construction with a dark rosewood fretboard. This guitar has a Shell Pink nitro finish on a Tulipwood body. Available to ship worldwide in a deluxe hard case or custom built, full flight case (optional extra).

SPECIFICATION
NECK: Through-neck - one piece, quarter sawn, Sapele Mahogany
BODY: Tulipwood
FINGERBOARD: 24 fret Indian Rosewood
SCALE LENGTH: 25.5”
FINGERBOARD RAD: 13”-14” Custom Compound
NECK PROFILE: Custom Lucem “C”
FINISH: Shell Pink Nitro
FRETWIRE: Nickel Silver - Medium Jumbo.
FRET MARKERS: White mother of Pearl blocks and side dots.
NUT MATERIAL: Bone.
TRUSS ROD: 2-way slim line.
SCRATCHPLATE: 4 ply imitation tortoiseshell.
HARDWARE: Chrome
BRIDGE/TREM: BIGSBY B5 with Schaller STM Roller Saddle
TUNERS: Schaller Da’Vinci’
CONTROLS: 5 x CTS 500k audio push pull pots (tolerance 10%) 2 x 0.022uF orange drop capacitors Switchcraft toggle switch and jack 1x volume and 1x tone for each pickup.

PICKUPS
Lucem ‘Storm Rider’ set - hand wound in UK by Aaron Armstrong of Kent Armstrong Pickups
Neck - 12 pole, coil splittable Alnico 3 humbucker, chrome cover
Bridge - 12 pole, coil splittable Alnico 5 humbucker, chrome cover

SWITCHING
Provides 21 possible different combinations:
All controls in down position - Normal config
Neck volume up - Neck humbucker coil split
Bridge volume up - Bridge humbucker coil split
Neck tone up - Neck and Bridge in series
Bridge tone up - Neck and bridge out of phase

Features our one piece neck through construction with a dark rosewood fretboard. This guitar has a nitro finish on a Tulipwood body finished in Surf Blue. Available to ship worldwide in a deluxe hard case or custom built, full flight case (optional extra).

SPECIFICATION
NECK: Through-neck - one piece, quarter sawn, Sapele Mahogany
BODY: Tulipwood
FINGERBOARD: 24 fret Indian Rosewood
SCALE LENGTH: 25.5”
FINGERBOARD RAD: 13”-14” Custom Compound
NECK PROFILE: Custom Lucem “C”
FINISH: Surf Blue Nitro
FRETWIRE: Nickel Silver - Medium Jumbo.
FRET MARKERS: White mother of Pearl blocks and side dots.
NUT MATERIAL: Bone.
TRUSS ROD: 2-way slim line.
SCRATCHPLATE: Imitation tortoiseshell.
HARDWARE: Chrome
BRIDGE/TREM: BIGSBY B5 with Schaller STM Roller Saddle
TUNERS: Schaller Da’Vinci’
CONTROLS: 5 x CTS 500k audio push pull pots (tolerance 10%) 2 x 0.022uF orange drop capacitors Switchcraft toggle switch and jack 1x volume and 1x tone for each pickup.

PICKUPS
Lucem ‘Storm Rider’ set - hand wound in UK by Aaron Armstrong of Kent Armstrong Pickups
Neck - 12 pole, coil splittable Alnico 3 humbucker, chrome cover
Bridge - 12 pole, coil splittable Alnico 5 humbucker, chrome cover

SWITCHING
Provides 21 possible different combinations:
All controls in down position - Normal config
Neck volume up - Neck humbucker coil split
Bridge volume up - Bridge humbucker coil split
Neck tone up - Neck and Bridge in series
Bridge tone up - Neck and bridge out of phase

Features our one piece neck through construction with a roasted maple fretboard. This guitar has a satin antique oil and wax finish on a American Black Walnut body with Maple facings. Available to ship worldwide in a deluxe hard case or custom built, full flight case (optional extra)

SPECIFICATION
NECK: Through-neck - one piece, quarter sawn, Roasted Maple
BODY: American Black Walnut and Maple facings
FINGERBOARD: 24 fret Roasted Maple
SCALE LENGTH: 25.5”
FINGERBOARD RAD: 13”-14” Custom Compound
NECK PROFILE: Custom Lucem “C / D”
FINISH: Antique Satin
FRETWIRE: Stainless Steel- Medium Jumbo.
FRET MARKERS: Black mother of Pearl dots and side dots.
NUT MATERIAL: Graphtec Graphite
TRUSS ROD: 2-way slim line.
SCRATCHPLATE: Acrylic vintage brown tortoiseshell.
HARDWARE: Aged Nickel
BRIDGE/TREM: BIGSBY B5 with Stewmac Roller Saddle
TUNERS: Grover Rotomatics
CONTROLS: 5 x CTS 500k audio push pull pots (tolerance 10%) 2 x 0.022uF orange drop capacitors Switchcraft toggle switch and jack 1x volume and 1x tone for each pickup.

PICKUPS:
Bare Knuckle ‘The Mule’ aged set with nickel radiator covers

SWITCHING
Provides 21 possible different combinations:
All controls in down position - Normal config
Neck volume up - Neck humbucker coil split
Bridge volume up - Bridge humbucker coil split
Neck tone up - Neck and Bridge in series
Bridge tone up - Neck and bridge out of phase